Replacement Parts...

Replacement Parts...

Replacement Parts...

Replacement Parts...

Kits are engineered to fit specific vehicle makes and models Choose from front or center-mount options Front-mount allows for rapid connection. Easy-on, easy-off thanks to self-locating pin design. No need to crawl under the vehicle. No reduction in ground clearance Center-mount plate remains attached to the ATV and becomes a structural component...

This versatile non-vehicle-specific plow mount will transform almost any ATV into a plow-ready machine. Compatible with both WARN ProVantage and Standard center-mount push tubes, the Universal Plow Mount provides stability and versatility. Con-structed from steel and wearing a durable powder-coated finish, this mount is ideal for seasonal duty and ...

For standard straight blade Compatibility : Warn Cyclone blade/Standard blade numbers 70948/70954/70960/Provantage blade 78950 ...

Compatibility : Standard blades 37574/38732/38121...

Replacement part for standard steel wear bar...

Effortlessly lifts your plow without needing to use your winch. Screwdrive system is compact and easy to install. Works with all WARN plow systems, new or old.Optimized Lift Speed For Grading Control Screw-Drive System Has Plenty Of Lifting Power With Low Amp Draw Includes All Hardware, Wiring, And All-Weather Handlebar-Mounted Switch Compact De...

Replacement Parts...

Replacement Parts...

To install tracks on your UTV, you need: Step 1 Choose your WSS4 Track kit Step 2  Select the proper track adapter (BOM1) depending on your UTV model. It is recommended to browse the website using the Search “by vehicle” search tool. Step 3  Select the proper Front anti-rotation (BOM2) and rear (BOM3). It is recommended to browse th...

Plastic frame to use with Commander track...

Replacement part for Commander track tensioner...

Replacement Parts...

Replacement Parts...

Replacement Parts...

Replacement track for WSS4 COMMANDER...

Replacement Parts...

Replacement Parts...

This Attack™ screw is 25mm long for use in rubber lugs/treads 23mm+ (0.91?+). This reliable, carbide tip screw attacks the terrain and adds the extra bite that is sometimes needed on power sports vehicles, tractors, and more. For snowmobile, we recommend a 25mm+ (1.00?+) lug height. Common uses: Argos ATVs Bob Cats Buggies Dirt Bikes Quads Sid...

The Gripper™ screw is the largest screw in Woody’s® Twist™ line at 33mm. Designed to self-tap into lugs 33mm+ (1.30?+), this screw provides meticulous hookup for trail groomers and heavy equipment vehicles that require maneuvering on icy hills, through slick corners, and on uneven terrain. There’s no need to hassle with heavy chains when t...

Soft grippy diamond tread is for comfort and rider feedback Mouled wiring arrangement is both durable and discret 1-piece moulded construction ensures unrivalled performance and reliability Grip design fits vast majority of bikes but can be cut down in size if required Intelligent Heat Controller Raised and tactical silicone buttons for use wi...

Sealed for life Up to 50C Rainproof switch Draws under 4A Moulded wiring arrangement is both durable and discreet 1-piece moulded construction ensures unrivalled performance and reliability Grip design fits the vast majority of ATVs, but can be cut down in length if required. Handlebar mounted switch includes a High and Low setting. Durable ...

Replacement EVO V9 controller unit....

Integrated controller The built-in controller allows the rider to effortlessly control the temperature of their Heaterz® without removing their hand from the grip. Intelligent heat setting memory This innovative function stores the previous heat setting and defaults to this at power-up, saving time when in regular use. Responsive heat set...

Integrated controller The built-in controller allows the rider to effortlessly control the temperature of their Heaterz® without removing their hand from the grip. Intelligent heat setting memory This innovative function stores the previous heat setting and defaults to this at power-up, saving time when in regular use. Responsive heat set...

The next evolution of Heaterz® Pro. In response to customer feedback, we've added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves. Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected settin...

The next evolution of Heaterz® Pro. In response to customer feedback, we've added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves. Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected settin...

The next evolution of Heaterz® Pro. In response to customer feedback, we've added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves. Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected settin...

Advanced Adventure Heaterz Grip...

Advanced Touring Heaterz Grip...

Advanced Sport Heaterz Grip...

Kimpex introduces the Commander HD4, a track system designed for heavy-duty work with minimum effort from your part. With a 4,000 lbs load capacity, the HD4 is the most robust and powerful track system in the powersport industry. Unsurpassed in the mud thanks to multi-level protection of bearings, this system is very easy to handle while providing...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Increased lifting height of the plow blade. More efficient plow push Better stability than simple front mounting Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic plow 60...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

Click 'N' Go LT push frame liftting hook only...

The DRT Motorsports universal sun visor kit provides shielding and shade from the sun to block glare for both the driver and the passenger. The kit comes as a pair of visors and uses our thin profile clamp system to mount to your cage crossbar for attachment. Clamp sizes are available in 1.50”, 1.750”, 1.875”, and 2.00” to cover a wide ra...

Hi/Lo temperature adjustment Inside model with adhesive backing Round rocker switch Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

Easy to install, uses only 4 watts of electricity, protect your thumb from freezing. Volt : 13,5 V Number of watt at low intensity : 4,6 W Number of watt at hi intensity : 3,7 W Number of ampere at low intensity : 0,34 A (ohms : 0,40) Number of ampere at hi intensity : 0,27 A (ohms : 0,50) ...

Effective at keeping hands warm Simple operation: Hi/Low/Off switch Easy installation on your handlebar Reference OEM No. 515-175-657 Sold by pair ...

Dog Type Folding Sleigh Ski This ski is designed for Kimpex numero912900. Sold by unit...

Hi/Lo temperature adjustment for both grip and thumb warmer. Adhesive backing for easy installation Included #902025 + #912021 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

Hi/Lo temperature adjustment for both grip and thumb warmer Adhesive backing for easy installation Included #902025 + #902160 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

One variable heat controller allows comfort temperature setting for your palms and thumb. The thumb is a little hotter than grips. Easy installation Grips 7/8” Included #165137 + #902160 Volt : 13,5 V Number of watt at low intensity : 18,5 W Number of watt at hi intensity : 16,2 W Number of ampere at low intensity : 1.35 (ohms : 0,10) Number ...

30 degree point provides outstanding penetration Thru-hardened for high strength and wear resistance Slender performance profile equals lightweight Mix them with “catapults” to cover all ice conditions Recommended for competition only. Thread size: 7 mm and 1/4" - 20 N.C. ...

This Power Point Carbide Push-Through Stud is designed for the Ski-Doo XP and select Arctic Cat snowmobiles with single Ply Tracks. This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamf...

This Power Point Carbide Push-Through Stud is designed for the Ski-Doo XP and select Arctic Cat snowmobiles with single Ply Tracks. This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamf...

This Power Point Carbide Push-Through Stud is designed for the Ski-Doo XP and select Arctic Cat snowmobiles with single Ply Tracks. This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamf...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

This Power Point Carbide Push-Through Stud is designed for the Ski-Doo XP and select Arctic Cat snowmobiles with single Ply Tracks. This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamf...

This Power Point Carbide Push-Through Stud is designed for the Ski-Doo XP and select Arctic Cat snowmobiles with single Ply Tracks. This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamf...

“STUD BOY”® announces the “SUPER-LITE” Pro Series backer plate line-up. The “SUPER-LITE” Pro Series backer is designed for the rider who is looking for lightweight stud support that offers the lightest weight and best traction available and includes the support nut molded directly into the backer. “SUPER-LITE” Pro Series backers ar...

“STUD BOY”® announces the “SUPER-LITE” Pro Series backer plate line-up. The “SUPER-LITE” Pro Series backer is designed for the rider who is looking for lightweight stud support that offers the lightest weight and best traction available and includes the support nut molded directly into the backer. “SUPER-LITE” Pro Series backers ar...

30 degree point provides outstanding penetration Thru-hardened for high strength and wear resistance Slender performance profile equals lightweight Mix them with “catapults” to cover all ice conditions Recommended for competition only. Thread size: 7 mm and 1/4" - 20 N.C. ...

Stud Template 2.86" for Single Ply Track or Plus + Backers...

Use this dust cap to protect your axle nut Fits hub with inner diamerter of 1.98" Sold in pairs ...

Use this dust cap to protect your axle nut Fits hub with inner diamerter of 1.98" Sold in pairs ...

The DRT Motorsports universal sun visor kit provides shielding and shade from the sun to block glare for both the driver and the passenger. The kit comes as a pair of visors and uses our thin profile clamp system to mount to your cage crossbar for attachment. Clamp sizes are available in 1.50”, 1.750”, 1.875”, and 2.00” to cover a wide ra...

Hi/Lo temperature adjustment Inside model with adhesive backing Round rocker switch Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

Easy to install, uses only 4 watts of electricity, protect your thumb from freezing. Volt : 13,5 V Number of watt at low intensity : 4,6 W Number of watt at hi intensity : 3,7 W Number of ampere at low intensity : 0,34 A (ohms : 0,40) Number of ampere at hi intensity : 0,27 A (ohms : 0,50) ...

Effective at keeping hands warm Simple operation: Hi/Low/Off switch Easy installation on your handlebar Reference OEM No. 515-175-657 Sold by pair ...

Dog Type Folding Sleigh Ski This ski is designed for Kimpex numero912900. Sold by unit...

Hi/Lo temperature adjustment for both grip and thumb warmer. Adhesive backing for easy installation Included #902025 + #912021 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

Hi/Lo temperature adjustment for both grip and thumb warmer Adhesive backing for easy installation Included #902025 + #902160 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

One variable heat controller allows comfort temperature setting for your palms and thumb. The thumb is a little hotter than grips. Easy installation Grips 7/8” Included #165137 + #902160 Volt : 13,5 V Number of watt at low intensity : 18,5 W Number of watt at hi intensity : 16,2 W Number of ampere at low intensity : 1.35 (ohms : 0,10) Number ...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Increased lifting height of the plow blade. More efficient plow push Better stability than simple front mounting Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic plow 60...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...