To get the Click 'N' Go LT plow system, you need: Mid-Frount Mounting Characteristics Installation between the front suspension tables. Attachment point behind the front axle for more effective plow push. Step 1 (Select the bracket of your choice) 873000 : Click 'N' Go LT push frame Step 2 (Select the blade of your choice) 373993: Plastic p...

Click 'N' Go LT push frame liftting hook only...

With your Cool Lube Up-Front Ski mounted scratchers – Up-Front & between your skis, you’ll get more hardpack snow & Ice chips spraying right up into and onto the front of your spinning track. Directly into all you track’s open ‘windows’ & around and down into your track’s open sides. Allowing your favourite cable type scratc...

A pair of two part scratcher brackets for"up-front" on-ski mounting of all brands and types of cable scratchers to provide superior spray of ice & snow directly at and down the sides of snowmobile track for improved performance of lubricating sliders and cooling heat exhangers. A single-bolt universal fit (most all OEM and aftermarket) ski P...

These winter gas engines feature a weather resistant cover and fuel prime and choke system for easy starting. Use on snowblowers, augers and other outdoor winter equipment 12V Starter and recoil start 420 cc 6 liters fuel tank Low noise at 72 dB Shaft size: 1" 3 Amp @ 12V DC or 110V charging system Warranty: 1 year ...

Sealed for life Up to 50C Rainproof switch Draws under 4A Moulded wiring arrangement is both durable and discreet 1-piece moulded construction ensures unrivalled performance and reliability Chrome end cap can be used; alternatively the end can be cut off andd your own Bar End used Intelligent electronic temperature control comes complete with...

Heated Grip replacement Cruiser...

Sealed for life Up to 50C Rainproof switch Draws under 4A Moulded wiring arrangement is both durable and discreet 1-piece moulded construction ensures unrivalled performance and reliability Grip design fits the vast majority of ATVs, but can be cut down in length if required. Handlebar mounted switch includes a High and Low setting. Durable ...

Ergonomically engineered grips surface structures: Squared tread pattern for medium wear resistance and maximum vibration absorption. 52 block sipped tread for high levels of grip and feel Diamond tread pattern where maximum grip is required Waffle matrix for finger grip Open ended Intelligent heat controller Raised and tactile silicone buttons f...

Ergonomically engineered grips surface structures: Thicker rubber for maximum wear resistance and durability Rhombus tread pattern for medium wear resistance and maximum vibration absorbtion. 52 block siped tread for high levels of grip and feel Diamond tread pattern where maximum grip is required Open ended Intelligent heat controller: Raised a...

Soft, Ultra-grippy diamond tread is inspired by race grips for comfort and feedback Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required. Open ended Intelligent heat controller: Raise...

Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required Weather resistant, panel-dash fit switch with 2 heat settings Durable rubber tread absorbs vibrations while providing good levels of ...

Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required. Open ended. Weather resistant heat controller: 2-way switch with High/Low function Small size: 52 x 30 x 24 mm (W x D x H) Zero b...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

You can have it all-easy installation and great performance. Try a few of these at your next studding party. Features: 60° carbide point for superior penetration and durability Heat treated for high strength and wear resistance Thin penetration profile ensures traction Lightweight and durable design 5/16"-24 thread size with lock nuts included ...

Set of 2 adhesive heating strips Voltage: 13,5 V Number of watts: 26,8 W Number of amperes: 1.99 (ohms: 6,8) ...

The only ice scratcher that uses a replaceable Woody’s carbide tip. Full stainless wire rope and ends for lifetime use. Designed to be run down at all times, but can be mounted on the rails if needed. Replaceable and affordable carbide scratcher tip. Large mounting base to avoid rail wear. Short version: For rail mounting on tracks under 140 in...

Material : Carbide Fits on : Kimpex Numero 284304 & 284305...

You are looking for the best to cool down your sled during long day riding? Look at this ice scratcher A-ARM kit exclusively distributed by Kimpex.   Kit included: 284305:2 Straightline performance long cable 16" ice scratcher 202571:2 A-Arm mount Carbide tips Full stainless wire rope and ends for lifetime use. Designed to be run down at all t...

Round tip...

Plate constructed from 3/16” Grade 50 Steel All Pin Tabs are constructed from 1/4” Thick Grade 50 Steel All Plow tabs are tapered to help reduce hang-ups while trail riding$$ These Mounts are metal bead blasted before they are powder coated for the best possible finish prep.$$ Powder Coated Black for supreme durability Complete installation in...

For use with Cycle Country Plow Blades 1/2" Grade 50 Steel Pad Clear Zinc Plated .63" Diameter 5 1/4" Length ...

Specifically designed for use with KFI ATV Tubes #219000 Constucted of 10 gage Grade 50 steel Designed to help reinforce the ATV tube system when used with Tracked vehicules or Sport Side X Sides like the Polaris RZR All Hardware included Added and re-routed Winch attachment points ...

Lightweight Blade fully assembled at 25 lbs 50” width Flexable Black Poly Vacuum formed face 3/16” and 10 gage Grade 50 Steel Rib and Frame construction Shot Blasted and Powder Coated Black 2-Sided 3/16” Grade 50 Steel wear bar 17” Vertical blade face height$$ Works with current KFI No.105000 or 105590 ATV Tube System$$ 1/4” thic...

Requires UTV Track Extension #105565 or #106330 Specifically designed for use with KFI UTV Tubes #105635 / Open Trail Tubes #10-5635 Does NOT include the Tube System #105635 (Purchase separatly) Does NOT include Actuator #ACT203 Requires drilling Powder Coated TOUGH Made in USA ...

Plate constructed from 3/16” Grade 50 Steel All Pin Tabs are constructed from 1/4” Thick Grade 50 Steel All Plow tabs are tapered to help reduce hang-ups while trail riding$$ These Mounts are metal bead blasted before they are powder coated for the best possible finish prep.$$ Powder Coated Black for supreme durability Complete installation in...

Works with KFI ATV Push Tubes Kimpex#219000 Will work universally on most ATVs Use with up to 60” KFI Blades When done plowing the lift will remain with the plow tubes Shot Blasted before powder coating Powder Coated TOUGH - Black Gets at least 5-1/2” of lift with around 25lbs of lift effort ...

Works with both ATV and UTV Plow Base/Push Tubes Constructed of Heavy Duty 3/16” or 1/4” Grade 50 Steel Extends ATV Blade 14.0” or 15.33” (two-position) Extends UTV Blade 10.33” Shot Blasted before powder coating Powder Coated TOUGH - Black All Hardware included ...

Easy installation Comes with dimmer switch Completely assembled wiring harness Large molded grips Volt : 13,5 V Number of watt at low intensity : 18,5 W Number of watt at hi intensity : 16,2 W Number of ampere at low intensity : 1.35 (ohms : 0,10) Number of ampere at hi intensity : 1.13 (ohms : 0,12) ...

Fits on: Plow frame with arm (81-232 and 781-232) ...

Protect your hands from the cold on your next trail ride. This Heated Grip Kit makes a toasty addition to any ATV or snowmobile. Designed for the ultimate in grip comfort these grips will not interfere with thumb throttles and fit any 7/8” handlebars....

Protect your hands from the cold on your next trail ride. This Heated Grip Kit makes a toasty addition to any ATV or snowmobile. Designed for the ultimate in grip comfort these grips will not interfere with thumb throttles and fit any 7/8” handlebars. Easy to install with fully assembled, plug-n-play electrical connectors and featuring a handy,...

Replacement grip heater for Heat Demon One adhesive-backed external grip heater Maximum 25 watts at 14 volts ...

Complete Replacement Heated Grip One clamp-on heated grip Replace either left or right side grip Maximum 20 watts at 14 volts Will work with heated grip kits using POCO or glue-on grips ...

Complete Replacement Heated Grip One clamp-on heated grip Replace either left or right side grip Maximum 20 watts at 14 volts Will work with heated grip kits using POCO or glue-on grips ...

GUARANTEED COMFORT AT THE CONTROLS! Extend your days of ATV riding with Kimpex heated grips. Enjoy two controllable heat levels, better ergonomics and a comfortable grip. The grips are simply installed with a clamping ring. No adhesive required. Mounting the switch to the handlebar is just as easy. Molded into the handle, the sloped wiring exit a...

Replacement grip heater for Heat Demon One adhesive-backed external grip heater Maximum 25 watts at 14 volts ...

The heated grips will automatically turn off if ever the voltage goes under 12V in order avoid draining the battery. Provide an internal memory that will allow them to heat up quickly to the previous level, which will warm your hands in no time. ...

Ergonomically engineered grips surface structures: Squared tread pattern for medium wear resistance and maximum vibration absorption. 52 block sipped tread for high levels of grip and feel Diamond tread pattern where maximum grip is required Waffle matrix for finger grip Open ended Intelligent heat controller Raised and tactile silicone buttons f...

Ergonomically engineered grips surface structures: Thicker rubber for maximum wear resistance and durability Rhombus tread pattern for medium wear resistance and maximum vibration absorbtion. 52 block siped tread for high levels of grip and feel Diamond tread pattern where maximum grip is required Open ended Intelligent heat controller: Raised a...

Soft, Ultra-grippy diamond tread is inspired by race grips for comfort and feedback Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required. Open ended Intelligent heat controller: Raise...

Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required Weather resistant, panel-dash fit switch with 2 heat settings Durable rubber tread absorbs vibrations while providing good levels of ...

Molded wiring arrangement is both durable and discreet 1-piece molded construction ensures unrivalled performance and reliability Grip design fits the vast majority of bikes, but can be cut down in size of required. Open ended. Weather resistant heat controller: 2-way switch with High/Low function Small size: 52 x 30 x 24 mm (W x D x H) Zero b...

Superior performance and reliability Ergonomically engineered grips 5 heat setting Intelligent battery protection Easy to fit, easy to use Huge specification Size : 25mm/1” handlebars Included : 2x heated grips including chrome end caps, 1x intelligent heat controller, 1x Chrome handlebar bracket and fittings, 1x metal bracket and fittings, 2x...

Designed specifically for dirt & snow bikes. The aggressive lock on diamond pattern grips made of high quality materials will be sure to keep your hands glued to the grips all while keeping them warm and comfortable at the same time. Universal fitment, includes interchangeable throttle cable cams. Designed to fit majority of dirt/snow bike mod...

The snowmobile industry’s premier push-through stud with rugged durability for trail riding and cross country. Its patented track-trapping head provides unbeatable rigidity and support. For use in two-ply tracks and support plates Through-hardened carbon steel with 60° carbide insert 1? head with patented track trapping design Proper nuts inc...

Soft grippy diamond tread is for comfort and rider feedback Mouled wiring arrangement is both durable and discret 1-piece moulded construction ensures unrivalled performance and reliability Grip design fits vast majority of bikes but can be cut down in size if required Intelligent Heat Controller Raised and tactical silicone buttons for use wi...

Sealed for life Up to 50C Rainproof switch Draws under 4A Moulded wiring arrangement is both durable and discreet 1-piece moulded construction ensures unrivalled performance and reliability Grip design fits the vast majority of ATVs, but can be cut down in length if required. Handlebar mounted switch includes a High and Low setting. Durable ...

Replacement Parts...

Made on 66’’ snowblower models....

Subframe compatible with the 'Versatile', 'Premium' and 'Vantage' snow blowers...

Snowblower Auger of 48" for ATV Length: 48" Color: Black...

Fits on snowblower: 058336: Snowblower ATV 48" 358121: Versatile 48" Snowblower 058122: Snowblower 48" Pioneer (10) Bolts 088824 Dimensions: 5 x 45mm (Before 2001) (10) Bolts 088063 Dimensions: 1/4 x 1-13/16 Serial # 010611 and up ...

Assembly Fan...

Fits on snowblower: 058336: Snowblower ATV 48" 358121: Versatile 48" Snowblower 058122: Snowblower 48" Pioneer Quantity in package: 2 Dimensions: 1/2" x 41"...

87" Inner Clutch Cable...

Replacement Parts...

Side (2" x 3") and top extension (7"). Kit goes from 54" to 60". Fits on: Prestige 54" snowblower (458131), Versatile Plus 48" and 54" Snowblower (558125 et 558120)....

Fits on Versatile 54" snowblower (Kimpex number: 058123)....

Sold in package of 10. Numéro bolt: 058123-124 Fits with Prestige & Versatile snowblower models. Fits on: Prestige 54" Snowblower (458131) and Versatile Plus 48" ad 54" Snowblower (558125 et 558120)....

Top extension giving 10" more. Give 54" long in total. Requires Drift Cutters (No. 088975) Prestige 54" Snowblower (458131) and Versatile Plus 54" Snowblower (558125)....

Fits on Prestige (458131) snowblower. 088989: Timing belt number 600-8MT-30. ...

Replacement Parts...

Design for: (700474-1) Northeast Two Stage 44" Snowblower (700478-1) Northeast Two Stage 48" Snowblower ...

Subframe...

Replacement Parts...

089150 Shear bolt for auger. Sold in package of 10. Fits with blower 66" and 72" Vantage Snowblower (358126, 358127, 558131, 358128, 358129 et 358132) models. 089151 Shear bolt for fan Sold in package of 10. Fits with blower 66" and 72" Vantage Snowblower (358126, 358127, 558131, 358128, 358129 et 358132) models. ...

Designed for Versatile 48" & 54" Snowblower V3...

Replacement belt for 66" and 72" Vantage snowblower model. Sold in package of 1. Type: MXV5-560 ...

Single Belt System...

V2...

For 1.6" Cobra Track with already pre-drilled holes Caracteristics Oversized and pointed tungsten carbide For enhanced traction Hot-dipped steel and galvanized stud Big tread for good anchoring Lasting durability Light Easy to install and dismantle 100, 150, 200, 250 and 1000 unit packages Installation Tool Included ST = Standard Tread (without...

For use especially on packed and icy trail conditions, the Ice Scratchers produce and project ice fragments into the track and help lubricate the slides and cool the engine. Sold in pair ...

For use especially on packed and icy trail conditions, the Ice Scratchers produce and project ice fragments into the track and help lubricate the slides and cool the engine. Sold in pair ...

For all tracks 1 1/4" and - Caracteristics Oversized and pointed tungsten carbide For enhanced traction Hot-dipped steel and galvanized stud Big tread for good anchoring Lasting durability Light Easy to install and dismantle 100, 150, 200, 250 and 1000 unit packages Installation Tool Included ST = Standard Tread (without shoulder) R = Racing (t...

For all tracks 1 1/4" and + Caracteristics Oversized and pointed tungsten carbide For enhanced traction Hot-dipped steel and galvanized stud Big tread for good anchoring Lasting durability Light Easy to install and dismantle 100, 150, 200, 250 and 1000 unit packages Installation Tool Included ST = Standard Tread (without shoulder) R = Racing (t...

For Heavy Duty Track only 1 1/2" and + Caracteristics Oversized and pointed tungsten carbide For enhanced traction Hot-dipped steel and galvanized stud Big tread for good anchoring Lasting durability Light Easy to install and dismantle 100, 150, 200, 250 and 1000 unit packages Installation Tool Included SS = Shoulder Stud (with shoulder) R = Ra...