Tr?id=117752962913949&ev=PageView&noscript=
ID # 16709995

John Deere X350R Lawn Tractor w/ 42-inch Rear-Discharge Deck

Videos
Call for Price
Overview
  • 21.5-hp (13.8 kW)* Kawasaki V-twin, full-pressure lubricated, air-cooled
  • Rear-discharge, rear-collect deck cuts clean
  • Rear hopper has large capacity and is easy to empty
  • Best-in-class 4 year/300 hour limited warranty
 Features

Engine is smooth-running and reliable V-twin air-cooled design#

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

  • 21.5 hp (13.8 kW)
  • Large 603-cc displacement
  • V-twin air-cooled design that provides smooth, quiet power
  • Quality features include:
    • Cast-iron cylinder liners
    • Overhead valves
    • Full-pressure lubrication
    • Replaceable oil filter
    • Dual-stage air cleaner
  • V-twin design:
    • Excellent power and performance
    • Easy starts
    • Smooth operation
Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 15-amp capacity
  • Regulated to keep the battery at full charge without risk of overcharging
#

Fuel tank has large, conveniently located fill opening

Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy:

  • Located on the left fender
  • Helps eliminate spillage
  • 2-U.S. gal. (7.6-L) capacity
  • A low-fuel light is provided on the tractor dash to tell the operator when it is time to refuel.

#42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean

The innovative design of the 42-in. (107-cm) Edge™ Rear-Discharge Deck combines the best features for reliability and superior performance when mowing, collecting, and mulching grass and leaves:

  • The mower deck is stamped from 11-gauge, 0.12-in. (3-mm) steel to provide smooth contours for a quality appearance and excellent performance.
  • Easy to install or remove mulch plug is included as standard equipment.
    • The included AM147289 blades provide optimal collection/rear discharge and good mulching results in many conditions. For optimal mulching, AM140332 mulching blades are available.
  • With no side-discharge chute, the mower can trim on either side for mowing efficiency and convenience.
    • A smaller storage area requirement is an additional benefit.
  • A standard V-belt and non-timed blade design gives superior reliability and trouble-free operation.
  • Offset mower blades permit blade overlap with the use of a standard V-belt drive.
    • The blades cut cleanly without being able to contact each other.
  • Cut-height increments of 0.25 in. (0.64 cm) allow for operating the mower at the optimum cutting height.
  • An Exact Adjust deck-leveling system is provided to make keeping the deck properly adjusted easy.

The mower deck is contoured and free of obstructions to ensure optimum cutting and bagging performance:

  • Grass clippings flow smoothly around the deck and up the chute into the hopper.
  • Clipping buildup is minimized to ensure continued high-performance and easy cleanup.
  • Special discharge blades (standard equipment) have a large wing to propel grass clippings up the chute and into the hopper.
  • Mower fills and packs the 8.5-bu (300-L) hopper with a large volume of grass clippings and/or leaves.
#Standard mulch plug

Mulch plug easily installs in place of hopper:

  • A mulch plug is included with the model year 2017 and later X350R as standard equipment (serial number 20,001-).
  • Mulch plug is ideal for times when collecting grass clippings and leaves is not desired. The rear hopper can be easily removed and the mulch plug installed.
  • Plug closes off opening on bottom of deck so material cannot enter the chute.
  • The included AM147289 blades provide optimal bagging and rear discharge performance and good mulching results in many conditions.
    • For optimal mulching, AM140332 mulching blades are available.

SectionCommand components as seen on back side of meterA wash port is provided on the mower deck. It can be used to supply water to the underside of the deck so it can be easily cleaned after use:

  • The wash ports is designed for hose quick-connect fitting.
  • Connect hose to the wash port and operate the mower to clean.
  • Using the wash port cleans bottom of deck and chute.
  • The wash port works best if used immediately after the mowing job is completed.
  • Use of the wash port prevents buildup of material from affecting performance the next time the mower is used.

Optional rear deflector (BM25065) easily installs in place of hopper:SectionCommand components as seen on back side of meter

  • No tools required for installation
  • Deflects clippings in an even pattern behind the tractor

 

Rear hopper has large capacity and is easy to empty

The innovative design of the rear hopper sets a high standard for collecting systems:

  • Hopper is constructed of durable fabric for flexibility, where needed.
Hopper easily emptied from operator seat Durable 8.5-bu (300-L) hopper empties completely
Hopper shipping
 

The rear hopper is shipped in the returnable shipping crate with the tractor:

  • Minimizes shipping cost
  • No extra carton material of which to dispose

The hopper is made of durable materials and sealed to keep dust away from the operator.

Hopper is nested in tractor for efficient shipping Large-capacity hopper

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

  • The warranty is hassle free, with one company handling all of the paperwork.
  • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Snow removal is a strength of lawn tractors

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 44-in. (112-cm) Front Blade
  • 48-in. (122-cm) Front Blade (X394 Tractor only)
  • Tire chains or TerraGrip traction belts
  • Weather enclosure (available for all X300 Series, except the X350R)
  • Weights

44-in. (112-cm) Front Blade Snow blower, weather enclosure, and chains on an X300 Series Tractor

 

Specifications
Model
X350
Year
2024
Sale Type
New
Manufacturer
John Deere
Engine Size
603
Source
Byers
Battery
12 V
Governor
Mechanical
Cylinders
V-twin, cast-iron liners
Fuel Type
Gasoline
Oil Drain
No tools
Fuel Gauge
Gauge on dash
Air Cleaner
Dry, replaceable with foam precleaner
Engine Power
18.5 hp
Cooling Method
Air
Transaxle Type
K46 hydrostatic integrated with transaxle
Charging System
Flywheel alternator, regulated, 15 amp
Fuel Tank Capacity
2 U.S. gal.
Videos

Videos

Documents
My Cart - items