Tr?id=117752962913949&ev=PageView&noscript=
ID # 16709997

John Deere X370 Lawn Tractor w/ 42-in Deck

Videos
Call for Price
Overview
  • Powered by 21.5 hp * iTorque™ Power System
  • 42-in. Accel Deep™ Deck
  • Easy mulching with optional MulchControl™ Kit (one-touch or from deck versions)
  • Automotive-style power steering
  • Best-in-class 4 year/300 hour limited warranty
 Features

Engine is smooth-running and reliable V-twin air-cooled design#

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

  • 21.5 hp
  • Large 603-cc displacement
  • V-twin air-cooled design that provides smooth, quiet power
  • Quality features include:
    • Cast-iron cylinder liners
    • Overhead valves
    • Full-pressure lubrication
    • Replaceable oil filter
    • Dual-stage air cleaner
  • V-twin design:
    • Excellent power and performance
    • Easy starts
    • Smooth operation
Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 15-amp capacity
  • Regulated to keep the battery at full charge without risk of overcharging
#

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

  • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
  • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
    • Located on the left fender
    • Helps eliminate spillage
  • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

#The 42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

The 42-in. (107-cm) Accel Deep Mower Deck provides the performance advantages of a two-spindle mower in a wide 42-in. (107-cm) size:

  • Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
  • Wide mower wheels easily adjusted just above ground level to help prevent scalping
  • 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
  • Onboard deck-leveling system makes keeping mower properly adjusted easy
  • Compatible with optional MulchControl™ mulching system
  • Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
  • For use on X330, X350, X354, and X370 Tractors

The 42-in. (107-cm) Accel Deep mower deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

  • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional lever-action or electric one-touch MulchControl attachment for superior mulching performance and versatility
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, for reduced scalping
#Excellent cut quality

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.

#Productivity - gets the job done fast

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

  • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Seeded fields photo Cleanliness - for the mower and the operator

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
    • Less need to clean and remove buildup of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
    • Limited amount of material to drift onto the operator and mower deck
    • Even flow of material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and a MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

SectionCommand components as seen on back side of meter

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck
Superior durability is designed inSectionCommand components as seen on back side of meter

The 42A mower deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

  • Ribs in the deck shell add strength where it is needed.
  • The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) mower deck.

Mower wheels are double-captured:

  • Provides greater strength and durability for longer, trouble-free life.
  • Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

 

Versatility - easy to change between side discharge, mulch, and bagging modes SectionCommand components as seen on back side of meter

The 42A Mower Deck is designed for excellent versatility:

  • The mower's cut-and-throw design allows bagging with just the addition of the bagger chute, once the special bagging blades have been installed.
    • The 42A cut-and-throw chute is easy to install and securely held in place at the front and rear to provide a tight seal between the mower deck and the chute.
      • The rear latch is adjustable to allow for the optimum setting for easy use and a tight seal.
    • The bagging blades can be used for side discharging also.
  • With an optional lever action or electric one-touch MulchControl attachment installed (along with the special mulching blades), changing from side-discharging to mulching or vice versa is done with the simple flip of a lever or touch of a switch.
  • The rear bagger can be used with the MulchControl blades installed.
  • The front baffle, either the one included with the rear bagger chute or the one included with MulchControl (B), can remain in place for side discharging.
    • For ultimate side-discharge performance this baffle can be removed.
  • An optional MulchControl attachment includes a rear MulchControl baffle (A), held in place by two carriage bolts, at the rear edge of the discharge opening. This baffle:
    • Must be removed for installation of the rear bagger chute, a 13-mm (0.51-in.) wrench is required (the bagger chute cannot be installed without removing this baffle)
    • Can remain removed for side discharging material
    • Must be re-installed for mulching
MulchControl lever action or electric one-touch options

A MulchControl attachment for the 42A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
How MulchControl works
 
MulchControl is an innovative, simple design that is easy to use and maintain:
  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • When the MulchControl baffle is open, most of the material passes through the discharge opening.
    • When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
  • 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute; see explanation in the Versatility section for more information Optional rear bagger MulchControl baffle closed

7-bu (247-L) rear baggerOptional rear bagger

An optional 7-bu (247-L) cut-and-throw rear bagger material collection system (MCS) is available for use with the 42-in. (107-cm) Accel Deep Mower. It provides an efficient means of collecting grass clippings and leaves.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

  • 7-bu (247-L) capacity
  • Easy-to-attach lower chute (ordered separately)
  • Air exhaust duct
  • Convenient spring-latch
  • Airflow fill indicator
  • Quik-Tatch mounting
  • Sealed hopper top
  • Loose-knit bags available
Mower bladesOptional rear bagger

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

  • High-lift bagging blades also work well when side discharging material.

Mulching blades are included with the MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

 

 Mode(s) of operation  Mower blade
 Side discharging mode only   M170639 side-discharge blade (shipped with mower) 
 Bagging mode only  GX25668 bagging blade (shipped with BG20754 rear bagger chute)
 Mulching mode only  M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)
 Side discharge and mulching  M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)
 Side discharge and bagging  GX25668 bagging blade (shipped with BG20754 rear bagger chute)
 Side discharge, mulching, and bagging  M170642 mulching blade (shipped with BM24794 lever-action and BUC10164 electric one-touch MulchControl)

 

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

  • The warranty is hassle free, with one company handling all of the paperwork.
  • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

 

Specifications
Model
X370
Year
2023
Sale Type
New
Manufacturer
John Deere
Engine Size
603
Source
Byers
Battery
12 V
Governor
Mechanical
Cylinders
V-twin, cast-iron liners
Fuel Type
Gasoline
Oil Drain
No tools
Fuel Gauge
Gauge on dash
Air Cleaner
Dry, replaceable with foam precleaner
Engine Power
18.5 hp
Cooling Method
Air
Transaxle Type
K57 hydrostatic integrated with transaxle
Charging System
Flywheel alternator, regulated, 15 amp
Fuel Tank Capacity
3.3 U.S. gal.
Videos

Videos

Documents
My Cart - items