Set of two original replacement gaskets for the VForce4R reed valve system by Moto Tassinari. Please note, all gaskets with an "-K" included in the part number include two gaskets, which is enough for one reed valve system. Place one gasket on each side of the VForce manifold during installation.
Notes:
Each time you inspect your reeds for wear (which you should be doing twice a season) you should always replace the gaskets to make sure the seal has not and will not be compromised.
Always replacing gaskets is cheap insurance against air leaks which can ultimately lead to severe motor problems such as sucking dirt or an extremely lean condition.
Notes: