Tr?id=117752962913949&ev=PageView&noscript=
Overview
This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 - 1.10 at the following intervals:
  • Metric: 12mm, 14mm, 16mm, 18mm, 20mm, 28mm
  • Standard: 0.5"/ 0.55" / 0.63" / 0.71" / 0.79" / 1.10
  • Material: Powder Coated Marine Grade Aluminum
  • Ball Size: 1" Rubber Ball "B" Size
Note: Certain motorcycles require adding electrical tape to the area of the plug that is the largest diameter until it fits snugly in the stem. RAM recommends that you review the installation instructions for this part prior to ordering.

To obtain full support for your device:
  • Step 1: Choose your ball carrier that suits your use. (handlebar, flat surface, etc...)
  • Step 2: Select your sleeve for mounting ball. (Short, Standard, Standard )
  • Step 3: Choose your medium suitable for your device.
extra
Number
280307
Designed_for
Double Socket Arm
Mount_system
Bolted, 1″ Ball
Contact Information

 Contact Information

Byers Equipment Motorsports

5666 Hwy 12
Orillia   Ontario , L3V 0N8

(705) 325-2746 1 (888) 710-8015

Location
My Cart - items